Factory reset Sony Ericsson M600
Sony Ericsson M600
How to reset or restore a Sony Ericsson M600
If your Sony Ericsson M600 smartphone is running very slowly, hanging, you want to bypass the screen lock, or you have a full memory and want to erase everything, or you want to sell or give it away and want to ensure that nobody can access your files and passwords, you can do a factory reset to restore it to its original state like the first day.
There are three types of reset for a Sony Ericsson M600: the “soft” reset that restores the phone's settings to their factory state without deleting any files, phone numbers, ringtones or installed applications, the “strong” reset that deletes all the content of the phone, it is a total format of the device including the contacts, ringtones, photos, videos, applications, etc. and finally the “total” reset that should be used when the phone does not start or does not turn on and it would be your last resort to recover the Sony Ericsson M600.
Before making any kind of reset to your Sony Ericsson M600 it is highly recommended to charge the Sony Ericsson up to at least 80% of its battery.
“Soft” reset or “normal” reset
Estimated time: 5 minutes.
1- First step:
Unlock your Sony Ericsson M600 and from the home screen press or type the following code *#7780#
2- Second step:
Once the code is written, press the call button.
3- Third step:
A message will appear on the screen of your M600 asking if you want to restore the settings, press “Continue” f you want to continue.
4- Fourth step:
A message will appear asking you to write the security code of the Sony Ericsson M600 phone.
5- Fifth step:
After a few seconds the phone will reboot and ask you to enter the date and time settings.
If this method has not worked for you, go to Menu -> Tools -> Settings -> General -> Factory settings.
“Strong” reset or “deep” reset
1- Unlock your Sony Ericsson M600 and from the home screen press or type the following code *#7370#
2- Once the code is written, press the call button.
3- A message will appear on the screen of your M600 asking if you want to restore the settings, press “Continue” f you want to continue.
4- A message will appear asking you to write the security code of the Sony Ericsson M600 phone.
5- After a few seconds the phone will reboot and ask you to enter the date and time settings.
“Total” reset
1- Remove the battery from the Sony Ericsson M600 and put it back into position.
2- Press and hold these three keys at the same time: Green call button, asterisk * and power button.
3- Do not release these three keys until you see the welcome message on the screen of the M600 phone.
4- Wait for the Sony Ericsson to start and it will have restored.
Has it been useful?
About the device:
Sony Ericsson M600 is a mobile/cell phone with dimensions of 105 x 54 x 15 mm (4.13 x 2.13 x 0.59 in), a weight of 112 grams, , a screen resolution of 2.6 inches| 39 x 53 mm (~36.9% screen-to-body ratio).
It has a processor 32-bit Philips Nexperia PNX4008 208 MHz and an internal memory of 80 MB.
The Sony Ericsson M600 comes from the factory with the Symbian 9.1| UIQ 3.0 operating system.
