Read QR codes with Apple iPad mini 4
How to read QR codes on an Apple iPad mini 4?
First of all, you must be clear that it is a QR code. QR codes are codes that contain information that can be read by a camera, QR codes are two-dimensional, that is, it is necessary for the Apple iPad mini 4 camera to read both the width and the height of the QR code and can contain more information than a barcode (one-dimensional).
QR codes are often used to open a web address from a mobile device such as the Apple iPad mini 4 using its 8 MP| f/2.4| 32mm| autofocus camera or if used with a specific application, it can offer information about a product, service or serve to authenticate a user.
In the iPad mini 4 you can read or scan QR codes without having to download any application since the code reader is included in the software of the camera.
Table of Contents:
Estimated time: 2 minutes.
1- First step:
To read or capture a QR code on your Apple iPad mini 4, use the app “Camera” that is included, from the home screen look for the icon of a camera and open the application.
2- Second step:
From the Apple iPad mini 4 camera application, make sure that you are using the 8 MP| f/2.4| 32mm| autofocus rear camera and point it at the QR code that you want to read trying to make it appear correctly focused and content within the yellow square or at least within the viewing space , that is, you cannot bring the camera too close to avoid the code being cut off.
The QR code must be able to be seen in its entirety on the screen of the Apple iPad mini 4, the code does not have up or down, so it does not matter from which angle you approach it.
3- Third step:
From the top of the screen of the Apple iPad mini 4 a notification will appear indicating that it has read the content of the QR code and will offer us an action to perform, most QR codes contain a web address so it will offer us to open “Safari” or the web browser that you have defined by default on your iPad mini 4.
Click on the notification to open the web page or execute the action.
Capture QR code from the control centre
It is also possible to read a QR code by accessing it from the control centre of the Apple iPad mini 4 instead of opening the camera, this is a method to quickly access the QR code reader.
1- First step:
Swipe down from the top center or right of the screen to open the control centre of your Apple iPad mini 4.
2- Second step:
You will see the iPad mini 4 control centre where all the shortcuts to settings such as Wi-Fi connection, Bluetooth, lock rotation, etc. appear. Look for the QR code capture icon that you see in the following image.
Can't find the capture QR code icon?
If you don't see the QR code capture icon that appears in the image above, don't worry, you can add it to the control centre to use it every time you need it, check out this tutorial: Edit Control Centre on iPhone and iPad.
With these simple steps you have learned to read QR codes from your Apple iPad mini 4. Most QR codes are used to open websites, either to see the menu of a restaurant or to access a discount code or offer.
Share this information:
