How to power off a Cubot King Kong 3

If you need to turn off your Cubot King Kong 3, either because you need to save battery at night, get on a plane, protect your privacy, or switch it off to take it in for repair and you don't know or remember how to do it, in a few simple steps we show you the instructions to completely turn off your device.

In recent updates to the Android operating system, the power button is no longer used to turn off the King Kong 3, but has been replaced by the virtual assistant, so the shutdown option has been a little more hidden.

Table of Contents:

Estimated time: 2 minutes.

1- First step:

With the Cubot King Kong 3 locked or unlocked, long press the power or unlock button until a screen with several options appears.

Press Android power button

2- Second step:

Among the options displayed on the screen of the Cubot King Kong 3, choose "Power off". If a confirmation message appears, tap accept.

Android shutdown button

3- Third step:

The screen will go dark and the Cubot King Kong 3 will turn off, wait a few seconds or minutes for the shutdown to complete. When it is turned on again, it will request the PIN code of the SIM card and the pattern, fingerprint or unlock code.

Screen turn off android

If the King Kong 3 power button does not work or activate the assistant.

1- First step:

First of all, display the quick access or settings bar of your Cubot King Kong 3. To do this, with the Cubot King Kong 3 unlocked, you can slide your finger from the top of the screen downwards, the shortcuts to device settings will be displayed.

Open Android quick panel

2- Second step:

Swipe a second time to fully display the shortcuts panel. You will see in the lower right part a button with the symbol to turn on / off, click on this button to continue.

Shut down button on quick panel Android

3- Third step:

Several options will be displayed on the King Kong 3 screen, including activating emergency mode, restarting, and the option you are looking for: "Turn off". Click on the "Turn off" button to continue.

Confirm shutdown Android

How to turn off Cubot King Kong 3 if it is not responding?

If you cannot turn off the Cubot King Kong 3 since it is blocked and the previous method does not work, you must proceed to turn it off and on again using the physical buttons.

To force shutdown your King Kong 3 press and hold the power button (or unlock button) for at least 8 seconds until the Cubot or Android logo appears on the screen and release the button as it powers up again.

As a last resort, if you can't turn off the King Kong 3 with any of the above methods and you need to turn it off, you should wait for the battery to run down. You can keep the screen on and do heavy usage to drain the battery faster.

If the device still does not respond, does not turn off, or is stuck in a loop, it may indicate a hardware issue, such as a malfunctioning motherboard, memory, screen, or power button. In this case, you may need to have it repaired or use your warranty.

Video instructions

Share this information:

Share on WhatsApp Share on Telegram

Has it been useful?

Questions and problems from users about "How to turn off a Cubot King Kong 3 from the settings"

There are no questions yet about "How to turn off a Cubot King Kong 3 from the settings"; you can write the first one.

You might be interested in:

Reset
Locate
Restart
IMEI code
Delete Google account
Serial number
Frequently asked questions
Configure mail
Device features
Hard reset