How to power off an Apple Watch Series 1 Sport 42mm

If you cannot turn off the Apple Watch Series 1 Sport 42mm using the buttons, either because the power button does not work or because it is very difficult to press all the buttons at the same time, you can turn off the Watch Series 1 Sport 42mm from the settings.

In recent updates to the operating system, the power button is no longer used to turn off the Apple Watch as it would be logical, now it can be configured to activate Siri without the need to use your voice but it will not turn off or restart the device when held down.

Turning off your Watch Series 1 Sport 42mm from the settings will only take you four simple steps:

Estimated time: 2 minutes.

1- First step:

Press the side button of your Apple Watch Series 1 Sport 42mm for a few seconds until a screen appears with several options, the first option is to turn off, followed by the option to view medical data and the option to send an SOS emergency request.

How to switch off Watch Series 1 Sport 42mm

2- Second step:

Slide the power button next to "Power off" from left to right to turn off your Apple Watch Series 1 Sport 42mm.

Turn off Watch Series 1 Sport 42mm

3- Third step:

Your Apple Watch Series 1 Sport 42mm will turn off, wait a few seconds without touching any buttons while it turns off.

How to switch off Watch Series 1 Sport 42mm

How to turn off Apple Watch Series 1 Sport 42mm if it is not responding?

If you cannot turn off the Apple Watch Series 1 Sport 42mm because the screen is broken or locked, and the previous method doesn’t work, you will need to turn it off using the physical buttons.

To force a shutdown of the Watch Series 1 Sport 42mm, press and hold the power button (or unlock button) and the digital crown until the Apple logo appears, then release the digital crown and hold the power button. If the screen is broken and you can't slide your finger to turn it off, press and hold the power button for at least 8 seconds until it turns off.

If the device still does not respond, does not turn off, or is stuck in a loop, it may indicate a hardware issue, such as a malfunctioning motherboard, memory, screen, or power button. In this case, you may need to have it repaired or use your warranty.

Share this information:

Share on WhatsApp Share on Telegram

Has it been useful?

Questions and problems from users about "How to turn off an Apple Watch Series 1 Sport 42mm from the settings"

There are no questions yet about "How to turn off an Apple Watch Series 1 Sport 42mm from the settings"; you can write the first one.

You might be interested in:

IMEI code
Locate
Screenshot
Reset
Restart
Device features