IMEI code in Fossil Gen 4 Explorist

Fossil Gen 4 Explorist

How to see the IMEI code in Gen 4 Explorist

There is a very easy way to see the IMEI code in a Fossil Gen 4 Explorist through a hidden code in the system.

The IMEI code identifies a mobile device uniquely, each Fossil device has its own IMEI code, this code must be printed on the device box and in the case of devices with removable battery under it. Here we discover how to get it in a Fossil Gen 4 Explorist very easily through the system settings.

IMPORTANT: Only devices with eSIM or SIM have an IMEI code, that is, only devices that have an independent internet connection through a SIM card other than that of the mobile phone. The rest of the devices do not have an IMEI code, the code to identify them is the serial number.

Table of Contents:

First method:

Estimated time: 1 minute.

1- First step:

Unfold the quick access bar of your Fossil Gen 4 Explorist by sliding your finger from the top of the screen downwards. Click on the settings icon, it is the icon of a cog wheel or gear, it is easy to confuse it with the brightness settings icon on the screen.

2- Second step:

Scroll down by sliding your finger from the bottom of the Fossil Gen 4 Explorist screen up until you find the "System" section. Click to continue.

3- Third step:

Scroll down the screen again until you find the "Information" section, it is the section with the icon of an exclamation point. Press to access the information data of the Fossil Gen 4 Explorist.

4- Fourth step:

All the features of the Fossil Gen 4 Explorist will appear, including the serial number and IMEI number.

Second method:

Do you keep the case of your Fossil Gen 4 Explorist? In this case you will find the serial number code and the IMEI/MEID in the barcode on the back of the box.

Third method:

Another way to find the IMEI code for your Fossil Gen 4 Explorist is through the device settings, if your Fossil Gen 4 Explorist has a SIM or eSIM card, the IMEI code (or codes) will appear next to or below the serial number. Please refer to the following tutorial to see how to see the serial number step by step: Fossil Gen 4 Explorist serial number.

What is the purpose of obtaining the IMEI code of a Gen 4 Explorist?

The IMEI code is used for example to find out if a device Gen 4 Explorist it is an original Fossil, or it is a copy or imitation.

It is important to know what your IMEI code is in case of theft, to report it and ask the telephone operator to block the device and can not be used by another person.

It is also necessary to request an unlocking or release of the Fossil Gen 4 Explorist and that can be used with any SIM card of any operator, i.e. unlock a phone or tablet.

Other uses of the IMEI code are: knowing the country of origin of the device, knowing the date of manufacture and purchase, knowing the serial number, knowing if the device still has the manufacturer's Fossil warranty and know if the device is on some IMEI blacklist

About the device:

Fossil Gen 4 Explorist is a watch / smartwatch / bracelet with dimensions of 45 x 45 x 13 mm, a screen size of 1.4 inches and a screen resolution of 454 x 454 px.

It has a processor , a RAM memory 512 MB and an internal memory of 4 GB.

The Fossil Gen 4 Explorist comes from the factory with the Wear OS operating system.

Share this information:

Tweet Tweet to @DevicesFAQ