Hard reset Xiaomi Redmi K40 Pro
How to hard reset or fully wipe Xiaomi Redmi K40 Pro
If your Xiaomi Redmi K40 Pro does not turn on, it does not react, it shows an error message when it turns on or you want to sell it, give it away or take it in for repair and you want to make sure that all the content stored in its 128 GB / 256 GB internal memory is erased, you will have to force its restoration.
Forcing the restore or doing a “hard reset” is a drastic method that can be used when the Redmi K40 Pro settings cannot be accessed either because the password has been forgotten or the operating system is corrupted.
If you can access the settings of your Redmi K40 Pro and want to perform a restore, it is preferable to do so using the “Reset” method, otherwise continue reading to see step by step how to force the reset, format or do a “hard reset”.
This procedure erases all the content stored on the Redmi K40 Pro so if possible, you should make a backup copy of your data before proceeding and unlink the Google account.
Estimated time: 5 minutes.
1- First step:
First of all, turn off your Xiaomi Redmi K40 Pro completely. If you can't unlock the screen, press and hold the power button for about 20 seconds and the phone will turn off.
2- Second step:
Simultaneously press the power key and the volume key down on the Xiaomi Redmi K40 Pro for a few seconds. On some devices, depending on the Android version, the combination may be the power key and the volume key up.
3- Third step:
When the Xiaomi logo is displayed, release the buttons. In the following menu, the touch screen does not work, so you must move through the menu with the volume up and volume down keys until you reach the "Wipe data" option.
This menu is usually displayed in English.
4- Fourth step:
Use the volume up and volume down buttons again to select the "Wipe all Data" option and press the power button of the Xiaomi Redmi K40 Pro to access this section.
5- Fifth step:
A warning message will appear to avoid doing a hard reset to the Xiaomi Redmi K40 Pro by mistake. Use the volume up and volume down keys to select the "Confirm" option and press the power button to activate the option.
6- Sixth step:
After a few seconds, the factory formatting or restoration of the Xiaomi Redmi K40 Pro will be completed, returning to its factory state. Press the power button to select "Back to Main Menu" and return to the main menu.
7- Seventh step:
Now it is necessary to restart the Xiaomi Redmi K40 Pro so using the volume up and volume down buttons, move to the "Reboot" option and press the power button to proceed with the restart.
8- Eighth step:
A confirmation screen will appear where you must select "Reboot to System" again, and press the power button to confirm the restart of the Xiaomi Redmi K40 Pro.
Keep in mind that depending on the country, model and firmware updates of the Xiaomi Redmi K40 Pro, the procedure may be slightly different.
If you have had problems performing a forced restore of the Redmi K40 Pro , consult the following articles with frequent problems that appear below, if you cannot find a solution to your problem, consult the section “Frequently Asked Questions about Xiaomi Redmi K40 Pro” and leave your comment so that we can consult it and offer better service.
