Hard reset Tecno Spark Go 2020

How to hard reset or fully wipe Tecno Spark Go 2020

If your Tecno Spark Go 2020 does not turn on, it does not react, it shows an error message when it turns on or you want to sell it, give it away or take it in for repair and you want to make sure that all the content stored in its 32 GB internal memory is erased, you will have to force its restoration.

Forcing the restore or doing a “hard reset” is a drastic method that can be used when the Spark Go 2020 settings cannot be accessed either because the password has been forgotten or the operating system is corrupted.

If you can access the settings of your Spark Go 2020 and want to perform a restore, it is preferable to do so using the “Reset” method, otherwise continue reading to see step by step how to force the reset, format or do a “hard reset”.

This procedure erases all the content stored on the Spark Go 2020 so if possible, you should make a backup copy of your data before proceeding and unlink the Google account.

Table of Contents:

Estimated time: 5 minutes.

1- First step:

First of all, turn off your Tecno Spark Go 2020 completely. If you can't unlock the screen, press and hold the power button for about 20 seconds and the phone will turn off.

2- Second step:

Simultaneously press the power key and the volume key down on the Tecno Spark Go 2020 for a few seconds. On some devices, depending on the Android version, the combination may be the power key and the volume key up.

3- Third step:

When the Tecno logo is displayed, release the buttons. In the following menu, the touch screen does not work, so you must move through the menu with the volume up and volume down keys until you reach the option "Wipe data/factory reset" and press the power button to access it.

This menu is usually displayed in English, if the device menu appears in Chinese characters, see how to reset a mobile in Chinese.

4- Fourth step:

A warning message will appear to avoid hard reset the Tecno Spark Go 2020 by mistake. Use the Volume Up and Volume Down keys to select the "Yes" option and press the Power button to activate the option.

5- Fifth step:

After a few seconds, the formatting and deletion of all data from the Tecno Spark Go 2020 will have been carried out, returning to its factory state, now it is necessary to restart the Spark Go 2020 so using the volume up and volume down buttons, move to the option "Reboot system now" and press the power button to proceed to the restart.

Keep in mind that depending on the country, model and firmware updates of the Tecno Spark Go 2020, the procedure may be slightly different.

If you have had problems performing a forced restore of the Spark Go 2020 leave your comment so that we can consult it and offer better service.

Hard reset using a computer

In case you can't perform a factory reset by accessing the Android recovery menu using the Tecno Spark Go 2020's buttons, or if you can't access all of its functions, you can access this mode using a computer and a cable.

1- First step:

Download and install "ADB" on your computer. You can search Google for "adb download" or use the following download link from Google's official website:
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
ADB, or "Android Debug Bridge," is a command-line tool that enables communication between a computer and an Android device. It's part of the Android SDK (Software Development Kit) and provides a bridge for managing the device or its content.

2- Second step:

Extract the folder to a location on your hard drive. To extract the files, right-click the .zip file and click "Extract all." A window will appear where you can choose the location on your hard drive to extract the files.

3- Third step:

Connect the Tecno Spark Go 2020 via USB to your computer, preferably with its original cable. Otherwise, any cable that allows data transmission should work.

If one cable doesn't work, try another. There are cables that only transmit power to charge the battery but don't transmit data.

4- Fourth step:

Open a terminal (CMD or PowerShell) in the folder where you extracted the adb files. You can find the "adb" folder inside the "platform-tools" folder.
Right-click and click "Open in Terminal".

5- Fifth step:

Type: adb devices in the terminal, as shown in the following image. Press the "Enter" key on your keyboard.

6- Sixth step:

If the Spark Go 2020 appears under the text "List of devices attached", type in the terminal: adb reboot recovery.

7- Seventh step:

If it doesn't appear, try another cable. If it appears as "unauthorized," you must authorize USB debugging from the device. Check the Spark Go 2020 screen and tap "Allow."

8- Eighth step:

The Spark Go 2020 will enter recovery mode. From there, you can perform a wipe data/factory reset using the volume and power buttons, as described in the "Hard reset using the buttons" procedure.

Share this information: