Emergency call Tecno Spark 30
Emergency calls on Tecno Spark 30
It is important to have activated and configured both the medical data and the SOS emergency calls on your Tecno Spark 30 since you never know when you are going to need it and it may be too late to make this configuration when it is necessary.
Follow the steps below to also add medical data to your Tecno Spark 30, in the event of an accident, the emergency services will be able to see data such as blood group, allergies, weight, organ donation and contact persons without accessing the rest of the content of the telephone.
Estimated time: 2 minutes.
Table of Contents:
- Set up emergency call
- Make SOS call on Tecno Spark 30
- Delete emergency information
- User questions and problems
Configure emergency calls on Tecno Spark 30
It is only possible to configure emergency calls for devices with a SIM or eSIM card since they make use of the call service through the GSM network or, failing that, it must be connected to a Wi-Fi network or via Bluetooth to another device that has a GSM connection or to the Internet.
1- First step:
Let's go to the settings of the Tecno Spark 30, it is the icon of the gear wheel that you will find on the home screen of the device.
2- Second step:
Go down through the settings of the Tecno Spark 30 to the last section called “Information about the device”. Click to access.
3- Third step:
Tecno Spark 30 device data such as its name, model, phone number will appear. Click on “Emergency information” to start configuring the emergency data.
If it does not appear here, go back and access the section called “Security”, depending on the version of the operating system, it may appear in one place or another.
4- Fourth step:
In the “Emergency information” section you can fill in the data that you want to be displayed on the Tecno Spark 30 screen in case the emergency mode is activated.
This is useful, for example, in the event of an accident, so that the emergency services can know the important medical details of the owner of the device or be able to contact relatives or contact persons. Click on “Add contact” to add emergency contacts.
5- Fifth step:
Search through the phonebook of your Tecno Spark 30 for the contacts you want to be notified in case of an emergency and click on each of them to add them.
6- Sixth step:
Click on “Add information” to add the rest of the data you want to the emergency screen. This information can be viewed without needing to know the PIN, pattern or access password of the Tecno Spark 30.
7- Seventh step:
Here you can add your name, an address (useful in case of loss), blood group, allergies, medication and other medical notes. Once you have added this data you will have finished configuring the contacts for SOS emergency calls on your Tecno Spark 30.
Make SOS call on Tecno Spark 30
1- First step:
To access data and emergency contacts hold down the power button of the Tecno Spark 30 a few seconds until the restart or shutdown screen is displayed.
2- Second step:
Three options will appear: Emergency, Shutdown, and Reboot. Press “Emergency” to see the options available for emergency calls and SOS contacts.
3- Third step:
A keyboard will appear on the screen of your Tecno Spark 30 and a button at the top with the text “EMERGENCY INFORMATION”. Click on this button to open the emergency information that the owner of the device has defined.
4- Fourth step:
The data of the owner of the Tecno Spark 30will be displayed, emergency contacts can also be seen. By clicking on the call button that appears to the right of each contact, you can make a call without the need for a PIN, pattern, fingerprint, or password to access the device.
