It is important to have activated and configured both the medical data and the SOS emergency calls on your Alldocube Talk 7X U51GT-C4 since we never know when we are going to need it and it may be too late to make this configuration when it is necessary.
Follow the steps below to also add medical data to your Alldocube Talk 7X U51GT-C4, in the event of an accident, the emergency services will be able to see data such as blood group, allergies, weight, organ donation and contact persons without accessing the rest of the content of the telephone.
Estimated time: 2 minutes.
Table of Contents:
It is only possible to configure emergency calls for devices with a SIM or eSIM card since they make use of the call service through the GSM network or, failing that, it must be connected to a Wi-Fi network or via Bluetooth to another device that has a GSM connection or to the Internet.
1- First step:
Let's go to the settings of the Alldocube Talk 7X U51GT-C4, it is the icon of the gear wheel that you will find on the home screen of the device.
2- Second step:
We go down through the settings of the Alldocube Talk 7X U51GT-C4 to the last section called “Information about the device”. Click to access.
3- Third step:
Alldocube Talk 7X U51GT-C4 device data such as its name, model, phone number will appear. Click on “Emergency information” to start configuring the emergency data.
If it does not appear here, go back and access the section called “Security”, depending on the version of the operating system, it may appear in one place or another.
4- Fourth step:
In the “Emergency information” section we can fill in the data that we want to be displayed on the Alldocube Talk 7X U51GT-C4 screen in case the emergency mode is activated.
This is useful, for example, in the event of an accident, so that the emergency services can know the important medical details of the owner of the device or be able to contact relatives or contact persons. Click on “Add contact” to add emergency contacts.
5- Fifth step:
Search through the phonebook of your Alldocube Talk 7X U51GT-C4 for the contacts you want to be notified in case of an emergency and click on each of them to add them.
6- Sixth step:
Click on “Add information” to add the rest of the data you want to the emergency screen. This information can be viewed without needing to know the PIN, pattern or access password of the Alldocube Talk 7X U51GT-C4.
7- Seventh step:
Here you can add your name, an address (useful in case of loss), blood group, allergies, medication and other medical notes. Once you have added this data you will have finished configuring the contacts for SOS emergency calls on your Alldocube Talk 7X U51GT-C4.
1- First step:
To access data and emergency contacts hold down the power button of the Alldocube Talk 7X U51GT-C4 a few seconds until the restart or shutdown screen is displayed.
2- Second step:
Three options will appear: Emergency, Shutdown, and Reboot. Press “Emergency” to see the options available for emergency calls and SOS contacts.
3- Third step:
A keyboard will appear on the screen of your Alldocube Talk 7X U51GT-C4 and a button at the top with the text “EMERGENCY INFORMATION”. Click on this button to open the emergency information that the owner of the device has defined.
4- Fourth step:
The data of the owner of the Alldocube Talk 7X U51GT-C4will be displayed, emergency contacts can also be seen. By clicking on the call button that appears to the right of each contact, you can make a call without the need for a PIN, pattern, fingerprint, or password to access the device.
To delete the emergency information from your Alldocube Talk 7X U51GT-C4, we will follow the steps described above until step 3.
Once inside the emergency information we can press the X to eliminate the emergency contacts and click on the owner's information to edit it and thus be able to eliminate it.
There are no questions yet about "How to set up SOS call and message on Alldocube Talk 7X U51GT-C4"; you can write the first one.