Manage wireless alerts on QSmart MB5011
Activate or deactivate emergency alerts on QSmart MB5011
Have you recently received an emergency alert test on your QSmart MB5011 and want to deactivate it? Don't know if you have emergency notifications activated and want to enable them? Do you want to check the emergency alerts you have recently received? Whatever your case, or if you simply want to check if wireless emergency alerts are turned on on your MB5011, here we will explain how to do it. We offer you a step by step with images so you don't get lost.
You should know that emergency alerts are a new feature that is being implemented in several countries and regions. Currently, tests are being carried out to ensure the correct functioning of the system. You may have been shocked when you saw that your MB5011 made a loud sound and displayed an alert message on the screen without understanding the reason.
Logically, we recommend keeping these emergency notices active, as they are very useful in the event of a catastrophe or emergency. Furthermore, they do not represent any privacy problem. We cannot ask authorities not to send these alerts to our phone number, as they are sent to all devices in a specific area, regardless of whether they are connected to the internet or not. However, you may want to disable this feature on your MB5011, especially if you already have multiple devices and would prefer to prevent them all from ringing simultaneously.
Estimated time: 2 minutes.
This guide has a total of 7 steps.
1- First step:
To access the QSmart MB5011 settings, first locate the gear icon, which should appear on the device's home screen. If you don't find it there, swipe up from the bottom edge of the Home screen to open the app list. In this list you will find the system search engine; type "Settings".
2- Second step:
Scroll down in the QSmart MB5011 settings until you reach the "Notifications" section, within this section you will find the emergency alert settings. Press to access notification settings.
3- Third step:
Scroll down again in the “Notifications” section until you reach the section called “Wireless Emergency Alerts”. Press to access emergency alert settings and check if they are activated or deactivated.
4- Fourth step:
Once in the “Wireless Emergency Alerts” settings, you can check whether alert notifications are activated or not.
5- Fifth step:
Check if the “Extreme threats” section is activated and change its status if you need to.
6- Fifth step:
In addition to turning emergency alerts on or off, you can manage test alerts on your device. These tests, carried out by the operators, serve to verify the proper functioning of the security alert system.
7- Fifth step:
Access the "Emergency Alert History" on your QSmart MB5011 to review previously sent alerts.
